LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2018 >> Kona Limited, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 96 (Abs/ESC Diagnosis (2 Of 2)) >> DTC C1613-08: CAN Wrong Message Form ECM >> DTC Information >> DTC Detecting Condition

DTC Information: DTC Detecting Condition

WARNING: This page is about a different car, the 2021 Kia Seltos. However, it is still accessible from the selected car via links, so may be relevant.
Item Detecting Condition Possible Cause
DTC Strategy
  • CAN message monitoring
  • Poor connector connection
  • Open in P-CAN line between HECU and ECM
  • Faulty ECM
Enable Condition
  • Ignition "ON"
Threshold Value
  • The abnormal EMS CAN message (engine torque, TPS, pedal) is received for more than specific time
Detecting time
  • In control: 500ms
  • No control: 1500ms
Warning Lamp
  • ESC, EPB
Disable Condition
  • When the normal state is confirmed after the ignition switch turns off and then on