LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2018 >> Kona Limited, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 94 (Front Radar System Diagnosis) >> DTC C1823-82: NAVI Invalid Signal For SCC >> System Inspection >> Vehicle S/W Management

Vehicle S/W Management

WARNING: This page is about a different car, the 2021 Kia Seltos. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION: * Perform the "Variant Coding" and "Inspection/correction of the front-radar mounting angle (FCA/SCC)" on "Vehicle S/W Management", once SCC/FCA ECU is replaced.
* Do not select the [C1] in "Inspection/correction of the front-radar mounting angle (FCA/SCC)", unless you have proper equipment to perform inline procedure.
Inspection Condition Inspection Procedure Reference
  1. Ignition "ON".
  1. Connect KDS/GDS to "Data Link Connector (DLC)".
  2. Perform "VEHICLE S/W MANAGEMENT " of concerned component with KDS/GDS.
Fig.1 to 10
G13486169Courtesy of KIA MOTORS AMERICA, INC.
G13486170Courtesy of KIA MOTORS AMERICA, INC.
G13486171Courtesy of KIA MOTORS AMERICA, INC.
G13486172Courtesy of KIA MOTORS AMERICA, INC.
G13486173Courtesy of KIA MOTORS AMERICA, INC.
G13486174Courtesy of KIA MOTORS AMERICA, INC.
G13486175Courtesy of KIA MOTORS AMERICA, INC.
G13486176Courtesy of KIA MOTORS AMERICA, INC.
G13486177Courtesy of KIA MOTORS AMERICA, INC.
G13486178Courtesy of KIA MOTORS AMERICA, INC.