LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2018 >> Kona Limited, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 94 (Front Radar System Diagnosis) >> DTC C1823-81: NAVI Invalid Signal For SCC >> System Inspection >> Vehicle S/W Management

Vehicle S/W Management

WARNING: This page is about a different car, the 2021 Kia Seltos. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION: * Perform the "Variant Coding" and "Inspection/correction of the front-radar mounting angle (FCA/SCC)" on "Vehicle S/W Management", once SCC/FCA ECU is replaced.
* Do not select the [C1] in "Inspection/correction of the front-radar mounting angle (FCA/SCC)", unless you have proper equipment to perform inline procedure.
Inspection Condition Inspection Procedure Reference
  1. Ignition "ON".
  1. Connect KDS/GDS to "Data Link Connector (DLC)".
  2. Perform "VEHICLE S/W MANAGEMENT " of concerned component with KDS/GDS.
Fig.1 to 10
G13486152Courtesy of KIA MOTORS AMERICA, INC.
G13486153Courtesy of KIA MOTORS AMERICA, INC.
G13486154Courtesy of KIA MOTORS AMERICA, INC.
G13486155Courtesy of KIA MOTORS AMERICA, INC.
G13486156Courtesy of KIA MOTORS AMERICA, INC.
G13486157Courtesy of KIA MOTORS AMERICA, INC.
G13486158Courtesy of KIA MOTORS AMERICA, INC.
G13486159Courtesy of KIA MOTORS AMERICA, INC.
G13486160Courtesy of KIA MOTORS AMERICA, INC.
G13486161Courtesy of KIA MOTORS AMERICA, INC.