LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2018 >> Kona Limited, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 94 (Front Radar System Diagnosis) >> DTC C1822-87: CAN Time-Out NAVI For SCC >> System Inspection >> Vehicle S/W Management

Vehicle S/W Management

WARNING: This page is about a different car, the 2021 Kia Seltos. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION: * Perform the "Variant Coding" and "Inspection/correction of the front-radar mounting angle (FCA/SCC)" on "Vehicle S/W Management", once SCC/FCA ECU is replaced.
* Do not select the [C1] in "Inspection/correction of the front-radar mounting angle (FCA/SCC)", unless you have proper equipment to perform inline procedure.
Inspection Condition Inspection Procedure Reference
  1. Ignition "ON".
  1. Connect KDS/GDS to "Data Link Connector (DLC)".
  2. Perform "VEHICLE S/W MANAGEMENT " of concerned component with KDS/GDS.
 Fig.1 to 10
G13486135Courtesy of KIA MOTORS AMERICA, INC.
G13486136Courtesy of KIA MOTORS AMERICA, INC.
G13486137Courtesy of KIA MOTORS AMERICA, INC.
G13486138Courtesy of KIA MOTORS AMERICA, INC.
G13486139Courtesy of KIA MOTORS AMERICA, INC.
G13486140Courtesy of KIA MOTORS AMERICA, INC.
G13486141Courtesy of KIA MOTORS AMERICA, INC.
G13486142Courtesy of KIA MOTORS AMERICA, INC.
G13486143Courtesy of KIA MOTORS AMERICA, INC.
G13486144Courtesy of KIA MOTORS AMERICA, INC.
scientia non olet · About LEMON Manuals