LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2018 >> Kona Limited, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 94 (Front Radar System Diagnosis) >> DTC C1817-81: CAN Signal Error Gateway >> System Inspection >> Vehicle S/W Management

Vehicle S/W Management

WARNING: This page is about a different car, the 2021 Kia Seltos. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION: * Perform the "Variant Coding" and "Inspection/correction of the front-radar mounting angle (FCA/SCC)" on "Vehicle S/W Management", once SCC/FCA ECU is replaced.
* Do not select the [C1] in "Inspection/correction of the front-radar mounting angle (FCA/SCC)", unless you have proper equipment to perform inline procedure.
Inspection Condition Inspection Procedure Reference
  1. Ignition "ON".
  1. Connect KDS/GDS to "Data Link Connector (DLC)".
  2. Perform "VEHICLE S/W MANAGEMENT " of concerned component with KDS/GDS.
Fig.1 to 10
G13486103Courtesy of KIA MOTORS AMERICA, INC.
G13486104Courtesy of KIA MOTORS AMERICA, INC.
G13486105Courtesy of KIA MOTORS AMERICA, INC.
G13486106Courtesy of KIA MOTORS AMERICA, INC.
G13486107Courtesy of KIA MOTORS AMERICA, INC.
G13486108Courtesy of KIA MOTORS AMERICA, INC.
G13486109Courtesy of KIA MOTORS AMERICA, INC.
G13486110Courtesy of KIA MOTORS AMERICA, INC.
G13486111Courtesy of KIA MOTORS AMERICA, INC.
G13486112Courtesy of KIA MOTORS AMERICA, INC.