LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2018 >> Kona Limited, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 94 (Front Radar System Diagnosis) >> DTC C1816-87: CAN Time-Out SJB >> System Inspection >> Vehicle S/W Management

Vehicle S/W Management

WARNING: This page is about a different car, the 2021 Kia Seltos. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION: * Perform the "Variant Coding" and "Inspection/correction of the front-radar mounting angle (FCA/SCC)" on "Vehicle S/W Management", once SCC/FCA ECU is replaced.
* Do not select the [C1] in "Inspection/correction of the front-radar mounting angle (FCA/SCC)", unless you have proper equipment to perform inline procedure.
Inspection Condition Inspection Procedure Reference
  1. Ignition "ON".
  1. Connect KDS/GDS to "Data Link Connector (DLC)".
  2. Perform "VEHICLE S/W MANAGEMENT " of concerned component with KDS/GDS.
 Fig.1 to 10
G13486088Courtesy of KIA MOTORS AMERICA, INC.
G13486089Courtesy of KIA MOTORS AMERICA, INC.
G13486090Courtesy of KIA MOTORS AMERICA, INC.
G13486091Courtesy of KIA MOTORS AMERICA, INC.
G13486092Courtesy of KIA MOTORS AMERICA, INC.
G13486093Courtesy of KIA MOTORS AMERICA, INC.
G13486094Courtesy of KIA MOTORS AMERICA, INC.
G13486095Courtesy of KIA MOTORS AMERICA, INC.
G13486096Courtesy of KIA MOTORS AMERICA, INC.
G13486097Courtesy of KIA MOTORS AMERICA, INC.
scientia non olet · About LEMON Manuals