LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2018 >> Kona Limited, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 94 (Front Radar System Diagnosis) >> DTC C1812-87: CAN Time-Out Gateway >> System Inspection >> Vehicle S/W Management

Vehicle S/W Management

WARNING: This page is about a different car, the 2021 Kia Seltos. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION: * Perform the "Variant Coding" and "Inspection/correction of the front-radar mounting angle (FCA/SCC)" on "Vehicle S/W Management", once SCC/FCA ECU is replaced.
* Do not select the [C1] in "Inspection/correction of the front-radar mounting angle (FCA/SCC)", unless you have proper equipment to perform inline procedure.
Inspection Condition Inspection Procedure Reference
  1. Ignition "ON".
  1. Connect KDS/GDS to "Data Link Connector (DLC)".
  2. Perform "VEHICLE S/W MANAGEMENT " of concerned component with KDS/GDS.
 Fig.1 to 10
G13486073Courtesy of KIA MOTORS AMERICA, INC.
G13486074Courtesy of KIA MOTORS AMERICA, INC.
G13486075Courtesy of KIA MOTORS AMERICA, INC.
G13486076Courtesy of KIA MOTORS AMERICA, INC.
G13486077Courtesy of KIA MOTORS AMERICA, INC.
G13486078Courtesy of KIA MOTORS AMERICA, INC.
G13486079Courtesy of KIA MOTORS AMERICA, INC.
G13486080Courtesy of KIA MOTORS AMERICA, INC.
G13486081Courtesy of KIA MOTORS AMERICA, INC.
G13486082Courtesy of KIA MOTORS AMERICA, INC.
scientia non olet · About LEMON Manuals