LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2018 >> Kona Limited, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 94 (Front Radar System Diagnosis) >> DTC C1804-87: CAN Time-Out LKAS >> System Inspection >> Vehicle S/W Management

Vehicle S/W Management

WARNING: This page is about a different car, the 2021 Kia Seltos. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION: * Perform the "Variant Coding" and "Inspection/correction of the front-radar mounting angle (FCA/SCC)" on "Vehicle S/W Management", once SCC/FCA ECU is replaced.
* Do not select the [C1] in "Inspection/correction of the front-radar mounting angle (FCA/SCC)", unless you have proper equipment to perform inline procedure.
Inspection Condition Inspection Procedure Reference
  1. Ignition "ON".
  1. Connect KDS/GDS to "Data Link Connector (DLC)".
  2. Perform "VEHICLE S/W MANAGEMENT " of concerned component with KDS/GDS.
Fig.1 to 10
G13486013Courtesy of KIA MOTORS AMERICA, INC.
G13486014Courtesy of KIA MOTORS AMERICA, INC.
G13486015Courtesy of KIA MOTORS AMERICA, INC.
G13486016Courtesy of KIA MOTORS AMERICA, INC.
G13486017Courtesy of KIA MOTORS AMERICA, INC.
G13486018Courtesy of KIA MOTORS AMERICA, INC.
G13486019Courtesy of KIA MOTORS AMERICA, INC.
G13486020Courtesy of KIA MOTORS AMERICA, INC.
G13486021Courtesy of KIA MOTORS AMERICA, INC.
G13486022Courtesy of KIA MOTORS AMERICA, INC.