DTC Information: DTC Detecting Condition

WARNING: This page is about a different car, the 2021 Kia Seltos. However, it is still accessible from the selected car via links, so may be relevant.

Item	Detecting Condition	Possible Cause
DTC Strategy	Monitoring CAN messages	Poor connection Faulty MFC Open or short in C-CAN communication line
Enable Condition	Engine "ON" (Engine "ON" signal received more than 2s) CAN communication line in normal condition Battery voltage is between 9V and 16V
Threshold Value	When CAN message has not been received from MFC via C-CAN
Diagnosis Time	0.5s
Symptom	SCC normal work SCC warning lamp turns off FCA disengagement and shutdown FCA warning lamp turns on NSCC normal work NSCC USM setup enabled