DTC Information: DTC Detecting Condition

WARNING: This page is about a different car, the 2021 Kia Seltos. However, it is still accessible from the selected car via links, so may be relevant.

Item	Detecting Condition	Possible Cause
DTC Strategy	Monitoring CAN messages	Spec information input error Bad vehicle assembly
Enable Condition	Ignition "ON" (ignition "ON" signal received more than 2s) Battery voltage is between 9V and 16V CAN communication line in normal condition
Threshold Value	AVN specification information error or bad vehicle assembly
Diagnosis Time	0.5s
Symptom	SCC normal work SCC warning lamp turns off FCA normal work FCA warning lamp turns off NSCC disengagement and shutdown NSCC USM setup disabled