DTC Information: DTC Detecting Condition

WARNING: This page is about a different car, the 2021 Kia Seltos. However, it is still accessible from the selected car via links, so may be relevant.

Item	Detecting Condition	Possible Cause
DTC Strategy	Monitoring CAN messages	Faulty CLU Open or short in CAN communication line
Enable Condition	Engine "ON" (Engine "ON" signal received more than 2s) CAN communication line in normal condition Battery voltage is between 9V and 16V
Threshold Value	When there is any failure while counting the message from CLU
Diagnosis Time	0.5s
Symptom	SCC disengagement and shutdown SCC warning lamp turns on FCA disengagement and shutdown FCA warning lamp turns on NSCC disengagement and shutdown NSCC USM setup disabled