LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2018 >> Kona Limited, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 94 (Front Radar System Diagnosis) >> DTC C1627-87: CAN Time-Out 4WD >> System Inspection >> Vehicle S/W Management

Vehicle S/W Management

WARNING: This page is about a different car, the 2021 Kia Seltos. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION: * Perform the "Variant Coding" and "Inspection/correction of the front-radar mounting angle (FCA/SCC)" on "Vehicle S/W Management", once SCC/FCA ECU is replaced.
* Do not select the [C1] in "Inspection/correction of the front-radar mounting angle (FCA/SCC)", unless you have proper equipment to perform inline procedure.
Inspection Condition Inspection Procedure Reference
  1. Ignition "ON".
  1. Connect KDS/GDS to "Data Link Connector (DLC)".
  2. Perform "VEHICLE S/W MANAGEMENT " of concerned component with KDS/GDS.
 Fig.1 to 10
G13485866Courtesy of KIA MOTORS AMERICA, INC.
G13485867Courtesy of KIA MOTORS AMERICA, INC.
G13485868Courtesy of KIA MOTORS AMERICA, INC.
G13485869Courtesy of KIA MOTORS AMERICA, INC.
G13485870Courtesy of KIA MOTORS AMERICA, INC.
G13485871Courtesy of KIA MOTORS AMERICA, INC.
G13485872Courtesy of KIA MOTORS AMERICA, INC.
G13485873Courtesy of KIA MOTORS AMERICA, INC.
G13485874Courtesy of KIA MOTORS AMERICA, INC.
G13485875Courtesy of KIA MOTORS AMERICA, INC.
scientia non olet · About LEMON Manuals