LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2018 >> Kona Limited, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 94 (Front Radar System Diagnosis) >> DTC C1623-87: CAN Time-Out Steering Angle Sensor >> System Inspection >> Vehicle S/W Management

Vehicle S/W Management

WARNING: This page is about a different car, the 2021 Kia Seltos. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION: * Perform the "Variant Coding" and "Inspection/correction of the front-radar mounting angle (FCA/SCC)" on "Vehicle S/W Management", once SCC/FCA ECU is replaced.
* Do not select the [C1] in "Inspection/correction of the front-radar mounting angle (FCA/SCC)", unless you have proper equipment to perform inline procedure.
Inspection Condition Inspection Procedure Reference
  1. Ignition "ON".
  1. Connect KDS/GDS to "Data Link Connector (DLC)".
  2. Perform "VEHICLE S/W MANAGEMENT " of concerned component with KDS/GDS.
 Fig.1 to 10
G13485833Courtesy of KIA MOTORS AMERICA, INC.
G13485834Courtesy of KIA MOTORS AMERICA, INC.
G13485835Courtesy of KIA MOTORS AMERICA, INC.
G13485836Courtesy of KIA MOTORS AMERICA, INC.
G13485837Courtesy of KIA MOTORS AMERICA, INC.
G13485838Courtesy of KIA MOTORS AMERICA, INC.
G13485839Courtesy of KIA MOTORS AMERICA, INC.
G13485840Courtesy of KIA MOTORS AMERICA, INC.
G13485841Courtesy of KIA MOTORS AMERICA, INC.
G13485842Courtesy of KIA MOTORS AMERICA, INC.
scientia non olet · About LEMON Manuals