LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2018 >> Kona Limited, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 94 (Front Radar System Diagnosis) >> DTC C1620-78: 1st Set-Up Not Completed >> System Inspection >> Vehicle S/W Management

Vehicle S/W Management

WARNING: This page is about a different car, the 2021 Kia Seltos. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION: * Perform the "Variant Coding" and "Inspection/correction of the front-radar mounting angle (FCA/SCC)" on "Vehicle S/W Management", once SCC/FCA ECU is replaced.
* Do not select the [C1] in "Inspection/correction of the front-radar mounting angle (FCA/SCC)", unless you have proper equipment to perform inline procedure.
Inspection Condition Inspection Procedure Reference
  1. Ignition "ON".
  1. Connect KDS/GDS to "Data Link Connector (DLC)".
  2. Perform "VEHICLE S/W MANAGEMENT " of concerned component with KDS/GDS.
 Fig.1 to 10
G13485818Courtesy of KIA MOTORS AMERICA, INC.
G13485819Courtesy of KIA MOTORS AMERICA, INC.
G13485820Courtesy of KIA MOTORS AMERICA, INC.
G13485821Courtesy of KIA MOTORS AMERICA, INC.
G13485822Courtesy of KIA MOTORS AMERICA, INC.
G13485823Courtesy of KIA MOTORS AMERICA, INC.
G13485824Courtesy of KIA MOTORS AMERICA, INC.
G13485825Courtesy of KIA MOTORS AMERICA, INC.
G13485826Courtesy of KIA MOTORS AMERICA, INC.
G13485827Courtesy of KIA MOTORS AMERICA, INC.
scientia non olet · About LEMON Manuals