DTC Information: DTC Detecting Condition
WARNING: This page is about a different car, the 2021 Kia Seltos. However, it is still accessible from the selected car via links, so may be relevant.
| Item |
Detecting Condition |
Possible Cause |
| DTC Strategy |
|
- Faulty sensor alignment
- Deformation of SCC/FCA module bracket and vehicle frame
|
| Enable Condition |
- Engine "ON" (Ignition "ON" signal received more than 2s)
- Vehicle speed is above 50 km/h (31 MPH) (running mode)
- Battery voltage is between 9V and 16V
|
| Threshold Value |
- Alignment process does not complete successfully (stop mode)
- Alignment of SCC/FCA sensor is abnormal
- Vertical angle is above -4 to +2 degree (stop mode)
- Horizontal angle is above -3 to +3 degree (stop mode/running mode)
|
| Diagnosis Time |
|
| Symptom |
- SCC disengagement and shutdown
- SCC warning lamp turns on
- FCA disengagement and shutdown
- FCA warning lamp turns on
- NSCC disengagement and shutdown
- NSCC USM setup disabled
|