LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2018 >> Kona Limited, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 94 (Front Radar System Diagnosis) >> DTC C1613-82: CAN Signal Error EMS >> System Inspection >> Vehicle S/W Management

Vehicle S/W Management

WARNING: This page is about a different car, the 2021 Kia Seltos. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION: * Perform the "Variant Coding" and "Inspection/correction of the front-radar mounting angle (FCA/SCC)" on "Vehicle S/W Management", once SCC/FCA ECU is replaced.
* Do not select the [C1] in "Inspection/correction of the front-radar mounting angle (FCA/SCC)", unless you have proper equipment to perform inline procedure.
Inspection Condition Inspection Procedure Reference
  1. Ignition "ON".
  1. Connect KDS/GDS to "Data Link Connector (DLC)".
  2. Perform "VEHICLE S/W MANAGEMENT " of concerned component with KDS/GDS.
Fig.1 to 10
G13485773Courtesy of KIA MOTORS AMERICA, INC.
G13485774Courtesy of KIA MOTORS AMERICA, INC.
G13485775Courtesy of KIA MOTORS AMERICA, INC.
G13485776Courtesy of KIA MOTORS AMERICA, INC.
G13485777Courtesy of KIA MOTORS AMERICA, INC.
G13485778Courtesy of KIA MOTORS AMERICA, INC.
G13485779Courtesy of KIA MOTORS AMERICA, INC.
G13485780Courtesy of KIA MOTORS AMERICA, INC.
G13485781Courtesy of KIA MOTORS AMERICA, INC.
G13485782Courtesy of KIA MOTORS AMERICA, INC.