LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2018 >> Kona Limited, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 94 (Front Radar System Diagnosis) >> DTC C1613-81: CAN Signal Error EMS >> System Inspection >> Vehicle S/W Management

Vehicle S/W Management

WARNING: This page is about a different car, the 2021 Kia Seltos. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION: * Perform the "Variant Coding" and "Inspection/correction of the front-radar mounting angle (FCA/SCC)" on "Vehicle S/W Management", once SCC/FCA ECU is replaced.
* Do not select the [C1] in "Inspection/correction of the front-radar mounting angle (FCA/SCC)", unless you have proper equipment to perform inline procedure.
Inspection Condition Inspection Procedure Reference
  1. Ignition "ON".
  1. Connect KDS/GDS to "Data Link Connector (DLC)".
  2. Perform "VEHICLE S/W MANAGEMENT " of concerned component with KDS/GDS.
Fig.1 to 10
G13485755Courtesy of KIA MOTORS AMERICA, INC.
G13485756Courtesy of KIA MOTORS AMERICA, INC.
G13485757Courtesy of KIA MOTORS AMERICA, INC.
G13485758Courtesy of KIA MOTORS AMERICA, INC.
G13485759Courtesy of KIA MOTORS AMERICA, INC.
G13485760Courtesy of KIA MOTORS AMERICA, INC.
G13485761Courtesy of KIA MOTORS AMERICA, INC.
G13485762Courtesy of KIA MOTORS AMERICA, INC.
G13485763Courtesy of KIA MOTORS AMERICA, INC.
G13485764Courtesy of KIA MOTORS AMERICA, INC.