DTC Information: DTC Detecting Condition

WARNING: This page is about a different car, the 2021 Kia Seltos. However, it is still accessible from the selected car via links, so may be relevant.

Item	Detecting Condition	Possible Cause
DTC Strategy	Monitoring CAN messages	Faulty engine ECM/PCM system
Enable Condition	Ignition "ON" (Ignition "ON" signal received more than 2s) CAN communication line in normal condition Battery voltage is between 9V and 16V
Threshold Value	When it received abnormal engine operating condition or accelerator pedal CAN message via CAN
Diagnosis Time	0.5s
Symptom (Abnormal engine operating)	SCC disengagement and shutdown SCC warning lamp turns on FCA disengagement and shutdown FCA warning lamp turns on NSCC disengagement and shutdown NSCC USM setup disabled
Symptom (Abnormal accelerator pedal)	SCC normal work SCC warning lamp turns off FCA disengagement and shutdown FCA warning lamp turns on NSCC normal work NSCC USM setup enabled