LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2018 >> Kona Limited, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 94 (Front Radar System Diagnosis) >> DTC C1612-87: CAN Time-Out TCU >> System Inspection >> Vehicle S/W Management

Vehicle S/W Management

WARNING: This page is about a different car, the 2021 Kia Seltos. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION: * Perform the "Variant Coding" and "Inspection/correction of the front-radar mounting angle (FCA/SCC)" on "Vehicle S/W Management", once SCC/FCA ECU is replaced.
* Do not select the [C1] in "Inspection/correction of the front-radar mounting angle (FCA/SCC)", unless you have proper equipment to perform inline procedure.
Inspection Condition Inspection Procedure Reference
  1. Ignition "ON".
  1. Connect KDS/GDS to "Data Link Connector (DLC)".
  2. Perform "VEHICLE S/W MANAGEMENT " of concerned component with KDS/GDS.
 Fig.1 to 10
G13485737Courtesy of KIA MOTORS AMERICA, INC.
G13485738Courtesy of KIA MOTORS AMERICA, INC.
G13485739Courtesy of KIA MOTORS AMERICA, INC.
G13485740Courtesy of KIA MOTORS AMERICA, INC.
G13485741Courtesy of KIA MOTORS AMERICA, INC.
G13485742Courtesy of KIA MOTORS AMERICA, INC.
G13485743Courtesy of KIA MOTORS AMERICA, INC.
G13485744Courtesy of KIA MOTORS AMERICA, INC.
G13485745Courtesy of KIA MOTORS AMERICA, INC.
G13485746Courtesy of KIA MOTORS AMERICA, INC.
scientia non olet · About LEMON Manuals