LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2018 >> Kona Limited, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 94 (Front Radar System Diagnosis) >> DTC C1611-87: CAN Time-Out EMS >> System Inspection >> Vehicle S/W Management

Vehicle S/W Management

WARNING: This page is about a different car, the 2021 Kia Seltos. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION: * Perform the "Variant Coding" and "Inspection/correction of the front-radar mounting angle (FCA/SCC)" on "Vehicle S/W Management", once SCC/FCA ECU is replaced.
* Do not select the [C1] in "Inspection/correction of the front-radar mounting angle (FCA/SCC)", unless you have proper equipment to perform inline procedure.
Inspection Condition Inspection Procedure Reference
  1. Ignition "ON".
  1. Connect KDS/GDS to "Data Link Connector (DLC)".
  2. Perform "VEHICLE S/W MANAGEMENT " of concerned component with KDS/GDS.
 Fig.1 to 10
G13485719Courtesy of KIA MOTORS AMERICA, INC.
G13485720Courtesy of KIA MOTORS AMERICA, INC.
G13485721Courtesy of KIA MOTORS AMERICA, INC.
G13485722Courtesy of KIA MOTORS AMERICA, INC.
G13485723Courtesy of KIA MOTORS AMERICA, INC.
G13485724Courtesy of KIA MOTORS AMERICA, INC.
G13485725Courtesy of KIA MOTORS AMERICA, INC.
G13485726Courtesy of KIA MOTORS AMERICA, INC.
G13485727Courtesy of KIA MOTORS AMERICA, INC.
G13485728Courtesy of KIA MOTORS AMERICA, INC.
scientia non olet · About LEMON Manuals