LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2018 >> Kona Limited, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 94 (Front Radar System Diagnosis) >> DTC C160C-87: Local CAN Time-out >> System Inspection >> Vehicle S/W Management

Vehicle S/W Management

WARNING: This page is about a different car, the 2021 Kia Seltos. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION: * Perform the "Variant Coding" and "Inspection/correction of the front-radar mounting angle (FCA/SCC)" on "Vehicle S/W Management", once SCC/FCA ECU is replaced.
* Do not select the [C1] in "Inspection/correction of the front-radar mounting angle (FCA/SCC)", unless you have proper equipment to perform inline procedure.
Inspection Condition Inspection Procedure Reference
  1. Ignition "ON".
  1. Connect KDS/GDS to "Data Link Connector (DLC)".
  2. Perform "VEHICLE S/W MANAGEMENT " of concerned component with KDS/GDS.
Fig.1 to 10
G13485701Courtesy of KIA MOTORS AMERICA, INC.
G13485702Courtesy of KIA MOTORS AMERICA, INC.
G13485703Courtesy of KIA MOTORS AMERICA, INC.
G13485704Courtesy of KIA MOTORS AMERICA, INC.
G13485705Courtesy of KIA MOTORS AMERICA, INC.
G13485706Courtesy of KIA MOTORS AMERICA, INC.
G13485707Courtesy of KIA MOTORS AMERICA, INC.
G13485708Courtesy of KIA MOTORS AMERICA, INC.
G13485709Courtesy of KIA MOTORS AMERICA, INC.
G13485710Courtesy of KIA MOTORS AMERICA, INC.