LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2018 >> Kona Limited, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 94 (Front Radar System Diagnosis) >> DTC C1604-04: ECU Hardware Error >> System Inspection >> Vehicle S/W Management

Vehicle S/W Management

WARNING: This page is about a different car, the 2021 Kia Seltos. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION: * Perform the "Variant Coding" and "Inspection/correction of the front-radar mounting angle (FCA/SCC)" on "Vehicle S/W Management", once SCC/FCA ECU is replaced.
* Do not select the [C1] in "Inspection/correction of the front-radar mounting angle (FCA/SCC)", unless you have proper equipment to perform inline procedure.
Inspection Condition Inspection Procedure Reference
  1. Ignition "ON".
  1. Connect KDS/GDS to "Data Link Connector (DLC)".
  2. Perform "VEHICLE S/W MANAGEMENT " of concerned component with KDS/GDS.
Fig.1 to 10
G13485673Courtesy of KIA MOTORS AMERICA, INC.
G13485674Courtesy of KIA MOTORS AMERICA, INC.
G13485675Courtesy of KIA MOTORS AMERICA, INC.
G13485676Courtesy of KIA MOTORS AMERICA, INC.
G13485677Courtesy of KIA MOTORS AMERICA, INC.
G13485678Courtesy of KIA MOTORS AMERICA, INC.
G13485679Courtesy of KIA MOTORS AMERICA, INC.
G13485680Courtesy of KIA MOTORS AMERICA, INC.
G13485681Courtesy of KIA MOTORS AMERICA, INC.
G13485682Courtesy of KIA MOTORS AMERICA, INC.