LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2018 >> Kona Limited, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 94 (Front Radar System Diagnosis) >> DTC C1211-81: Wheel Speed Sensor Rear-RH Invalid/No Signal >> System Inspection >> Vehicle S/W Management

Vehicle S/W Management

WARNING: This page is about a different car, the 2021 Kia Seltos. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION: * Perform the "Variant Coding" and "Inspection/correction of the front-radar mounting angle (FCA/SCC)" on "Vehicle S/W Management", once SCC/FCA ECU is replaced.
* Do not select the [C1] in "Inspection/correction of the front-radar mounting angle (FCA/SCC)", unless you have proper equipment to perform inline procedure.
Inspection Condition Inspection Procedure Reference
  1. Ignition "ON".
  1. Connect KDS/GDS to "Data Link Connector (DLC)".
  2. Perform "VEHICLE S/W MANAGEMENT " of concerned component with KDS/GDS.
 Fig.1 to 10
G13485647Courtesy of KIA MOTORS AMERICA, INC.
G13485648Courtesy of KIA MOTORS AMERICA, INC.
G13485649Courtesy of KIA MOTORS AMERICA, INC.
G13485650Courtesy of KIA MOTORS AMERICA, INC.
G13485651Courtesy of KIA MOTORS AMERICA, INC.
G13485652Courtesy of KIA MOTORS AMERICA, INC.
G13485653Courtesy of KIA MOTORS AMERICA, INC.
G13485654Courtesy of KIA MOTORS AMERICA, INC.
G13485655Courtesy of KIA MOTORS AMERICA, INC.
G13485656Courtesy of KIA MOTORS AMERICA, INC.
scientia non olet · About LEMON Manuals