LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2018 >> Kona Limited, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 94 (Front Radar System Diagnosis) >> DTC C1205-81: Wheel Speed Sensor Front-RH Invalid/No Signal >> System Inspection >> Vehicle S/W Management

Vehicle S/W Management

WARNING: This page is about a different car, the 2021 Kia Seltos. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION: * Perform the "Variant Coding" and "Inspection/correction of the front-radar mounting angle (FCA/SCC)" on "Vehicle S/W Management", once SCC/FCA ECU is replaced.
* Do not select the [C1] in "Inspection/correction of the front-radar mounting angle (FCA/SCC)", unless you have proper equipment to perform inline procedure.
Inspection Condition Inspection Procedure Reference
  1. Ignition "ON".
  1. Connect KDS/GDS to "Data Link Connector (DLC)".
  2. Perform "VEHICLE S/W MANAGEMENT " of concerned component with KDS/GDS.
 Fig.1 to 10
G13485615Courtesy of KIA MOTORS AMERICA, INC.
G13485616Courtesy of KIA MOTORS AMERICA, INC.
G13485617Courtesy of KIA MOTORS AMERICA, INC.
G13485618Courtesy of KIA MOTORS AMERICA, INC.
G13485619Courtesy of KIA MOTORS AMERICA, INC.
G13485620Courtesy of KIA MOTORS AMERICA, INC.
G13485621Courtesy of KIA MOTORS AMERICA, INC.
G13485622Courtesy of KIA MOTORS AMERICA, INC.
G13485623Courtesy of KIA MOTORS AMERICA, INC.
G13485624Courtesy of KIA MOTORS AMERICA, INC.
scientia non olet · About LEMON Manuals