LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2018 >> Kona Limited, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 92 (Blind-Spot Collision Warning Diagnosis) >> DTC C2703-54: Control Module Slave Missing Calibration >> Component Inspection >> Vehicle S/W Management

Vehicle S/W Management

WARNING: This page is about a different car, the 2021 Kia Seltos. However, it is still accessible from the selected car via links, so may be relevant.
Inspection Condition Inspection Procedure Reference
  1. BCW radar calibration.
  2. Ignition "ON".
  1. Connect KDS/GDS to "Data Link Connector (DLC)".
  2. Select "Vehicle S/W Management" with KDS.
  3. Select "BCW Radar Calibration" under "Vehicle S/W Management".
 Fig.1 to 6
G13492149Courtesy of KIA MOTORS AMERICA, INC.
G13492150Courtesy of KIA MOTORS AMERICA, INC.
G13492151Courtesy of KIA MOTORS AMERICA, INC.
G13492152Courtesy of KIA MOTORS AMERICA, INC.
G13492153Courtesy of KIA MOTORS AMERICA, INC.
G13492154Courtesy of KIA MOTORS AMERICA, INC.
scientia non olet · About LEMON Manuals