LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2018 >> Kona Limited, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 92 (Blind-Spot Collision Warning Diagnosis) >> DTC C170D-04: ECU Hardware Error (REAR LEFT) >> DTC Information >> DTC Detecting Condition

DTC Information: DTC Detecting Condition

WARNING: This page is about a different car, the 2021 Kia Seltos. However, it is still accessible from the selected car via links, so may be relevant.
Item Detecting Condition Possible Cause
DTC Strategy
  • Internal monitoring
  • Poor connection
  • Open or short in circuit
  • BCW radar (LH)
Enable Condition
  • After Initialization
  • Ignition "ON"
  • Normal input voltage condition (C110117/C110216 DTC not generated)
Threshold Value
  • ECU H/W error is detected
Symptom
  • BCW not operation
Clear Condition
  • Normal input voltage condition (C110117/C110216 DTC not generated)
  • Hardware error not found
Fail Safe
  • BCW mirror indicator off
  • BCW warning indicators