DTC Information: DTC Detecting Condition
WARNING: This page is about a different car, the 2021 Kia Seltos. However, it is still accessible from the selected car via links, so may be relevant.
| Item |
Detecting Condition |
Possible Cause |
| DTC Strategy |
|
- Poor connector connection
- CAN communicaiton circuit (open, short)
- CAN high line open
- CAN low line open
- CAN high and low line open
- CAN high line short to battery
- CAN low line short to battery
- CAN high, low line short to each other
- CAN high, low line short to each other and short to ground
- Terminating Resistance fault
- Transmitting controller BUS OFF
- Transmitting controller disconnected
- Transmitting controller power, fuse or ground fault
- Transmitting controller H/W, S/W fault
- CAN line noise
- CLU fault (CAN module fault)
|
| Enable Condition |
- Engine "ON"
- Normal operation
|
| Threshold Value |
- CLU CAN message is not received (after entering the initial CAN signal
|
| Detecting Time |
|
| Fail Safe |
|
| MIL |
|