LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2018 >> Kona Limited, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 88 (4WD Control System Diagnosis) >> DTC P1834: Actuator Thermal Overstress Shutdown >> Component Inspection >> S/W Management

S/W Management

WARNING: This page is about a different car, the 2021 Kia Seltos. However, it is still accessible from the selected car via links, so may be relevant.
Inspection Condition Inspection Procedure Reference
  1. Ignition "ON".
  1. Connect KDS to Data Link Connector (DLC).
  2. Select the menu "S/W Management" with KDS.
  3. Perform "Clutch Learning Reset" in "S/W Management" with KDS.
  4. After this procedure, go to "VERIFICATION OF REPAIR " procedure.
 Fig.1 to 4
CAUTION: This is the function to discharge the air inside the oil.
G13485198Courtesy of KIA MOTORS AMERICA, INC.
G13485199Courtesy of KIA MOTORS AMERICA, INC.
G13485200Courtesy of KIA MOTORS AMERICA, INC.
G13485201Courtesy of KIA MOTORS AMERICA, INC.
scientia non olet · About LEMON Manuals