Inspection Procedure
WARNING: This page is about a different car, the 2021 Kia Seltos. However, it is still accessible from the selected car via links, so may be relevant.
- Visually and/or physically inspect following conditions;
- Check EVAP canister for fuel saturation. If the EVAP canister is full of fuel, inspect EVAP and fuel system.
- Remove the manifold side vacuum hose from the EVAP canister purge valve.
- Using a hand vacuum pump, apply specified vacuum to the manifold side of the valve.
- Has any problems been found?
Good
- Go to "PCV INSPECTION " procedure.
No Good
- Repair as necessary and go to "VERIFICATION OF REPAIR " procedure.