Inspection Procedure
WARNING: This page is about a different car, the 2021 Kia Seltos. However, it is still accessible from the selected car via links, so may be relevant.
- Refer to
"REPAIR PROCEDURES
" and visually and/or physically inspect following conditions;
- Proper installation of O2 Sensors.
- Check for corrosion on terminals.
- Check for damaged wiring.
- Fuel, Engine coolant or oil contamination.
- Check for good ground for O2 sensor
- Has any problems been found?
Good
- Go to "WIRING INSPECTION " procedure.
No Good
- Repair as necessary and go to "VERIFICATION OF REPAIR " procedure.