Front Wiper Motor
WARNING: This page is about a different car, the 2021 Kia Seltos. However, it is still accessible from the selected car via links, so may be relevant.
- Remove the cowl top cover.
(Refer to Body - "COWL TOP COVER ")
- Remove the wiper motor & linkage assembly (A) after loosening the mounting bolts.
Tightening torque:
6.9 - 10.8 N.m (0.7 - 1.1 kgf.m, 5.1 - 8.0 lb.ft)
- Disconnect the wiper motor connector (A).