LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2018 >> Kona Limited, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 75 (Dual Clutch System - 1.6L) >> Dual Clutch Assembly >> Repair Procedures >> Removal

Repair Procedures: Removal

WARNING: This page is about a different car, the 2021 Kia Seltos. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the dual clutch transmission from the vehicle.

    (Refer to DCT System - "DCT ")

  2. Remove the spline hub (B) after removing a retaining ring (A).
    G13480960Courtesy of KIA MOTORS AMERICA, INC.
  3. Remove the snap ring (A).
    G13480961Courtesy of KIA MOTORS AMERICA, INC.
  4. Remove the dual clutch assembly (A) by using the special service tool (09430-C1180).
    G13480962Courtesy of KIA MOTORS AMERICA, INC.
scientia non olet · About LEMON Manuals