LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2018 >> Kona Limited, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 75 (Dual Clutch System - 1.6L) >> Clutch Engagement Fork & Engagement Bearing >> Repair Procedures >> Removal

Repair Procedures: Removal

WARNING: This page is about a different car, the 2021 Kia Seltos. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the dual clutch transmission from the vehicle.

    (Refer to DCT System - "DCT ")

  2. Remove the dual clutch & TCM assembly.

    (Refer to Dual Clutch System - "DUAL CLUTCH & TCM ASSEMBLY ")

  3. Remove the clutch engagement bearing 1 (B) and 2 (A).
    G13480974Courtesy of KIA MOTORS AMERICA, INC.
  4. Remove the clutch engagement fork (A) and engagement bearing sleeve (B).
    G13480975Courtesy of KIA MOTORS AMERICA, INC.
scientia non olet · About LEMON Manuals