LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2018 >> Kona Limited, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 60 (Evaporative Emission Control System - 2.0L) >> Fuel Tank Pressure Sensor (FTPS) >> Repair Procedures >> Removal

Repair Procedures: Removal

WARNING: This page is about a different car, the 2021 Kia Seltos. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the battery negative (-) terminal.
  2. Remove the fuel tank.

    (Refer to Engine Control/Fuel System - "FUEL TANK ")

  3. Disconnect the fuel tank pressure sensor connector (A).
    G13482962Courtesy of KIA MOTORS AMERICA, INC.
  4. Remove the fuel tank pressure sensor (A) after releasing the hooks vertically.
    G13482963Courtesy of KIA MOTORS AMERICA, INC.