LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2018 >> Kona Limited, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 52 (Fuel Delivery System - 1.6L) >> Fuel Pump Control Module (FPCM) >> Repair Procedures >> Inspection

Repair Procedures: Inspection

WARNING: This page is about a different car, the 2021 Kia Seltos. However, it is still accessible from the selected car via links, so may be relevant.
  1. Connect the KDS to the vehicle's data link connector (DLC).
  2. Check for DTCs and repair according to the DTC guide.
  3. Check the power supply voltage provided to the fuel pressure sensor (FPS).

    Specification  : 5V

    G13480775Courtesy of KIA MOTORS AMERICA, INC.
  4. Check the voltage provided to the fuel pressure sensor (FPS) at idle.

    Specification  : 1.9 - 3.2 V

    G13480776Courtesy of KIA MOTORS AMERICA, INC.
  5. Check the fuel pressure in the low fuel line.

    (Refer to Fuel Delivery System - "FUEL PRESSURE TEST ")

    Items Specification
    Fuel Pressure (KPa) 500 Kpa
scientia non olet · About LEMON Manuals