LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2018 >> Kona Limited, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 52 (Fuel Delivery System - 1.6L) >> Fuel Pressure Control Valve (FPCV) >> Repair Procedures >> Inspection >> Components Inspection

Components Inspection

WARNING: This page is about a different car, the 2021 Kia Seltos. However, it is still accessible from the selected car via links, so may be relevant.
  1. Turn the ignition switch OFF and disconnect the battery negative (-) terminal.
  2. Disconnect the fuel pressure control valve connector.
  3. Measure resistance between the fuel pressure control valve terminals 1 and 2.
  4. Check that the resistance is within the specification.

    Specification:  0.5 Ω [20°C (68°F)]

scientia non olet · About LEMON Manuals