LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2018 >> Kona Limited, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 52 (Fuel Delivery System - 1.6L) >> Filler-Neck Assembly >> Repair Procedures >> Removal

Repair Procedures: Removal

WARNING: This page is about a different car, the 2021 Kia Seltos. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the Rear LH wheel.

    (Refer to Suspension System - "TIRES/WHEELS ")

  2. Remove the LH side rear wheel guard.

    (Refer to Body - "REAR WHEEL GUARD ")

  3. Open the fuel filler door.
  4. Remove the fuel filler-neck assembly mounting bolts (A).
    G13480792Courtesy of KIA MOTORS AMERICA, INC.
  5. Disconnect the fuel filler hose (A).
    G13480793Courtesy of KIA MOTORS AMERICA, INC.
  6. Disconnect the ventilation hose (A).
    G13480794Courtesy of KIA MOTORS AMERICA, INC.
  7. Remove the fuel filler-neck assembly (A) after loosening the mounting bolt.

    Tightening torque: 

    9.0 - 10.0 N.m (0.91 - 1.0 kgf.m, 6.63 - 7.37 lb-ft)

    G13480795Courtesy of KIA MOTORS AMERICA, INC.
scientia non olet · About LEMON Manuals