LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2018 >> Kona Limited, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 50 (Interior Trim) >> Door Step Trim >> Repair Procedures >> Replacement

Repair Procedures: Replacement

WARNING: This page is about a different car, the 2021 Kia Seltos. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION: Put on gloves to protect your hands.
NOTE:
  • When prying with a flat-tip screwdriver, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage.
  • Use a plastic panel removal tool to remove interior trim pieces to protect from damaging the surface.
  • Take care not to bend or scratch the trim and panels.
  1. Using a screwdriver or remover and remove the door step trim (A).

    [Front] 

    G13486328Courtesy of KIA MOTORS AMERICA, INC.

    [Rear] 

    G13486329Courtesy of KIA MOTORS AMERICA, INC.
  2. To install, reinstall in reverse order of removal procedure.

    Information 

    Replace any damaged clips.