LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2018 >> Kona Limited, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 469 (Engine Control System Diagnosis - 2.0L (3 Of 6)) >> DTC P0365-00: Camshaft Position Sensor 'B'(Exhaust) Circuit Malfunction (Bank 1) >> DTC Information >> DTC Detecting Condition

DTC Information: DTC Detecting Condition

WARNING: This page is about a different car, the 2021 Kia Seltos. However, it is still accessible from the selected car via links, so may be relevant.
Item Detecting Condition Possible Cause
DTC Strategy Case1
  • Missing signal check
  • Open or short in signal, ground or power supply circuit
  • Poor connection or damaged connector
  • Misadjusted crankshaft and camshaft pulley position
  • Faulty CMPS #2 (exhaust)
Case2
  • Noisy signal check
Enable Conditions
  • Engine synchronized
Threshold Value Case1
  • No camshaft edge detected within one revolution
Case2
  • Number of revolution with camshaft edge out of designed reference position window
Diagnostic Time Case1
  • 5 revolutions
Case2
  • 6 revolutions
MIL ON Condition
  • 2 driving cycles