Spark Plug Inspection
WARNING: This page is about a different car, the 2021 Kia Seltos. However, it is still accessible from the selected car via links, so may be relevant.
- Refer to
"SPARK PLUG
" and visually and/or physically inspect following conditions;
- Damaged insulation, worn electrodes, oil or fuel fouled, loose terminals and cracks.
- Measure the electrode gap.
Specification: Approx. 0.8 to 0.9 (0.0354 to 0.0433 in.)
- Measure the insulation resistance with an multimeter.
Specification: Approx. 10MΩ or more
- Has any problems been found?
Good
- Go to "FUEL SYSTEM INSPECTION " procedure.
No Good
- Repair as necessary and go to "VERIFICATION OF REPAIR " procedure.