Component Inspection
WARNING: This page is about a different car, the 2021 Kia Seltos. However, it is still accessible from the selected car via links, so may be relevant.
| Inspection Condition | (+) Probe | (-) Probe | Specification | ||
|---|---|---|---|---|---|
| Connector | Terminal | Connector | Terminal | ||
|
AATS (component side) | 1 (signal) | AATS (component side) | 2 (ground) | Table1 |
AATS SPECIFICATION
| Temperature [°C (°F)] | Resistance [kΩ] | Temperature [°C (°F)] | Resistance [kΩ] |
|---|---|---|---|
| -40 (-40) | 811.1 to 956.8 | 40 (104) | 15.7 to 16.6 |
| -20 (-4) | 255.6 to 287.7 | 50 (122) | 10.6 to 11.3 |
| 0 (32) | 91.5 to 98.8 | 60 (140) | 7.2 to 7.9 |
| 20 (68) | 36.6 to 38.0 | 80 (176) | 3.6 to 4.0 |
| 30 (86) | 23.8 to 24.7 |
Good
- Go to "VERIFICATION OF REPAIR " procedure.
No Good
- Carefully re-do this troubleshooting guide steps.
- If no problems were found with the circuits or connectors, replace the AATS and go to "VERIFICATION OF REPAIR " procedure.