DTC Information: DTC Detecting Condition
WARNING: This page is about a different car, the 2021 Kia Seltos. However, it is still accessible from the selected car via links, so may be relevant.
| Item |
Detecting Condition |
Possible Cause |
| DTC Strategy |
- Deviation check between actual CAM position and CAM set point position in case of changing set point (slow response of actuator)
|
- Poor connector connection
- Contamination of Oil/Clogged Oil Line
- Faulty Oil Control Valve
- Faulty Cam Phaser
- Faulty Exhaust CVVT Assembly
|
| Enable Conditions |
- Camshaft Set-point movement more than 12° within in less than 1s
- Camshaft set-point moved more than 3 times since engine start
- Engine speed at between 450RPM and 5000RPM
- Engine oil temperature at between 20°C (68°F) and 120°C (248°F)
- Battery voltage at between 11V and 16V
|
| Threshold Value |
- CAM position movement less than 4° within 1s
|
| Diagnostic Time |
|
| MIL ON Condition |
|