Circuit Inspection
WARNING: This page is about a different car, the 2023 Kia Seltos. However, it is still accessible from the selected car via links, so may be relevant.
| Inspection Condition | (+) Probe | (-) Probe | Specification | ||
|---|---|---|---|---|---|
| Connector | Terminal | Connector | Terminal | ||
|
CKPS connector | 1 (ground) | Chassis ground | - | Approx. 1.87V |
| CKPS connector | 2 (signal) | Chassis ground | - | Approx. 1.88V | |
|
CKPS connector | 1 (ground) | ECM/PCM connector | 74 (ground) | Approx. below 1Ω |
| CKPS connector | 2 (signal) | ECM/PCM connector | 95 (signal) | Approx. below 1Ω | |
| CKPS connector | 2 (signal) | Chassis ground | - | ∞ (infinity)Ω | |
Good
- Go to "COMPONENT INSPECTION " procedure.
No Good
- Repair or replace as necessary and then, go to "VERIFICATION OF REPAIR " procedure.