Testing And Repairing

WARNING: This page is about a different car, the 2021 Kia Seltos. However, it is still accessible from the selected car via links, so may be relevant.

Do not use wires or harnesses with broken insulation.
Replace them or repair them by wrapping the damage wire with electrical tape.
After installing parts, make sure that no wires are pinched under them.
When using electrical test equipment, follow the manufacturer's instructions and those described in this repair information.
If possible, insert the remover tool from the wire side (except water proof connector).

Courtesy of KIA MOTORS AMERICA, INC.
Use a probe with a tapered tip.
Refer to the user's guide in the wiring repair kit (Pub No.: TRK 015.)

Courtesy of KIA MOTORS AMERICA, INC.