ESC Function/Warning Lamp

WARNING: This page is about a different car, the 2023 Kia Seltos. However, it is still accessible from the selected car via links, so may be relevant.

The ESC function/warning lamp indicates the self-test and failure status of the ESC.

The ESC function/warning lamp is turned on under the following conditions:

During the initialization phase after IGN ON. (continuously 3 seconds).
When the ESC function is inhibited by system failure.
When the ESC control is operating. (Blinking - 2Hz)
During diagnostic mode. (Except standard mode)
Cluster lamp is ON when communication is impossible with CAN module.