LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2018 >> Kona Limited, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 42 (Hood Assembly) >> Hood Latch Release Handle >> Repair Procedures >> Replacement

Repair Procedures: Replacement

WARNING: This page is about a different car, the 2021 Kia Seltos. However, it is still accessible from the selected car via links, so may be relevant.
  1. Using a socket (B), remove the hood release handle (A).
    G13481859Courtesy of KIA MOTORS AMERICA, INC.
  2. To install, reinstall in reverse order of removal procedure.
    NOTE:
    • Make sure the hood latch cable is connected properly.
    • Make sure the hood locks/unlocks and opens/closes properly.
scientia non olet · About LEMON Manuals