Circuit Inspection

WARNING: This page is about a different car, the 2023 Kia Seltos. However, it is still accessible from the selected car via links, so may be relevant.

G00675774

Courtesy of KIA MOTORS AMERICA, INC.

Inspection Condition	(+) Probe		(-) Probe		Specification
Inspection Condition	Connector	Terminal	Connector	Terminal	Specification
Ignition "ON".	MFC connector	9 (L-CAN high)	Chassis ground	-	Fig.1
Ignition "ON".	MFC connector	3 (L-CAN low)	Chassis ground	-	Fig.1
Ignition "OFF". Disconnect the electrical connector(s) from the concerned component.	MFC connector	9 (L-CAN high)	SCC/FCA connector	2 (L-CAN high)	Approx. below 1Ω
	MFC connector	3 (L-CAN low)	SCC/FCA connector	3 (L-CAN low)	Approx. below 1Ω
Ignition "OFF". Disconnect the battery negitive cable. Disconnect the electrical connector(s) from the concerned component.	MFC (component side)	9 (L-CAN high)	MFC (component side)	3 (L-CAN low)	Approx. 1200Ω
	SCC/FCA (component side)	2 (L-CAN high)	SCC/FCA (component side)	3 (L-CAN low)	Approx. 1200Ω

G00675775

Courtesy of KIA MOTORS AMERICA, INC.

Good

Go to "Components Inspection " procedure.

No Good

Check for a short circuit between the wiring and the chassis ground.
Repair open or short in circuit and then go to "Verification Of Repair procedure.