Component Inspection

WARNING: This page is about a different car, the 2023 Kia Seltos. However, it is still accessible from the selected car via links, so may be relevant.

Inspection Condition	Inspection Procedure	Reference
Engine "ON".	Activate the LDWS/LKAS switch. Check the light of MFC on the instrument cluster.	Fig.1

Courtesy of KIA MOTORS AMERICA, INC.

Good

Go to "VERIFICATION OF REPAIR " procedure.
If no problems were found with the circuits or connectors, replace the MFC ECU and go to "VERIFICATION OF REPAIR " procedure.
* In case of replacing MFC ECU, perform following "System Inspection" procedures below.

No Good

If no problems were found with the circuits or connectors, replace the LDWS/LKAS switch and go to "VERIFICATION OF REPAIR " procedure.