LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2018 >> Kona Limited, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 41 (Lighting System) >> Hazard Lamp Switch >> Repair Procedures >> Removal

Repair Procedures: Removal

WARNING: This page is about a different car, the 2021 Kia Seltos. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the negative battery terminal.
  2. Remove the cluster fascia panel.

    (Refer to Body - "CLUSTER FASCIA PANEL ")

  3. Remove the hazard lamp switch (A) by pushing the holders in the direction of arrow.
G13486790Courtesy of KIA MOTORS AMERICA, INC.
G13486791Courtesy of KIA MOTORS AMERICA, INC.
scientia non olet · About LEMON Manuals