Pressure Control Solenoid Valve Resistance Inspection
WARNING: This page is about a different car, the 2023 Kia Seltos. However, it is still accessible from the selected car via links, so may be relevant.
| Inspection Condition | (+) Probe | (-) Probe | Specification | ||
|---|---|---|---|---|---|
| Connector | Terminal | Connector | Terminal | ||
|
E-module (component side) | 5 (power) | E-module (component side) | 12 (SOL_LP) | Approx. 5Ω |
Good
- Carefully re-do this troubleshooting guide steps.
- If problem still occurs, replace PCM and do "S/W Management - Oil-pressure characteristics backUP & Input (TCU Replacement)" and then go to "VERIFICATION OF REPAIR " procedure.
No Good
- Components has bending, corrosion, contamination, deterioration, and/or damage that would be problem and go to "VERIFICATION OF REPAIR " procedure when the component are replaced.
- Refer to "REPAIR PROCEDURES " and repair or replace the A/T (Perform the S/W Management when replace the transmission)
- Perform the S/W management of P073000 Vehicle S/W Management code and then, go to "VERIFICATION OF REPAIR " procedure.